01
Light frame · for a lithophane
±0,2 mm
The frame that gives
a lithophane its light.
A frame with a shelf for the lithophane panel and a cavity for an LED strip behind it — a visible opening at the front and a cable notch at the bottom. Set the opening and the frame width, look at the 3D preview and get an indicative price right away.
Visible opening
The opening is what you actually see from the front. The outer size is the opening plus twice the frame width — you will find it worked out in the summary.
Material
04 Advanced options
The defaults are matched to the default lithophane panel. Change them only if you know what you are after.
How it goes together
The frame prints upright and needs no supports. The lithophane panel drops into the slot from above and rests on the shelf, leaving the cavity behind it for an LED strip and a notch at the bottom for the cable. The LED strip and the power supply are not included.
The dimensions of the panel that fits this frame are in the summary on the right — thickness included. The default frame takes the default lithophane. Make a lithophane for this frame
Preparing your frame …
Building the mesh of the frame with its shelf and cavity, and calculating material use.
Drag to rotate, scroll or pinch to zoom.
What you are ordering
| Outer width | |
| Outer height | |
| Depth | |
| Opening — width | |
| Opening — height | |
| Panel — width | |
| Panel — height | |
| Panel — thickness | |
| Cable notch |
Indicative price for 1 piece, excl. VAT and shipping. The final price is confirmed before printing.
- STEP 1/3Set the openingEnter the width and height of the visible opening, then choose the frame width.
- STEP 2/3Check the previewTurn the model in the preview and read the dimensions of the panel that fits the frame.
- STEP 3/3OrderAdd the calculation to your cart and complete the purchase. Your frame enters the print queue the same day, shipped in 24–48 h.